|
CUSTOMER
SERVICE CENTRE
GB MECCANICA
Tel. (+039) 0575-497959
Fax (+039) 0575-416608
Web site www.gbmeccanica.com
email info@gbmeccanica.com
|
|
|
FUNCTION
OF THE Rolling Mill diameter d40
The
Rolling Mill diameter d40 is aimed at flattening
WIRES or METAL STRIPS having a thickness of maximum 0.70 mm.
The flattening action is obtained by means of nr.2 opposite
rotating rolls which can be drawn closer to each other or
moved away from each other by means of a manual thickness-adjusting
device equipped with a gradual indicator.
The mechanical flattening parts consists of an electromotor
connected with a reducer with two delivery sides, one for
each flattening roll. Transmission gears (belts and pulleys)
put into motion nr.2 universal shafts linked to flattening
rolls.
The wire and the metal strip to be worked can be wound within
the WINDING device equipped with a spool having a special
mechanical device which allows it to rotate while winding
and the alternated lateral movement in order to optimize the
winding process of the product itself. The rotation of the
spool is equipped with an adjustable mechanincal friction
clutch which allows the rotation to slide in case of an excess
of the drive of the wire or metal strip.
The winding-off of the wire and metal strip is carried out
by means of a special spool which can be placed on the winding-off
arm equipped with stroke-end, which stops the machine in case
the wire or metal strip are too taut.
The working speed can be electronically adjusted (by means
of a potentiometer and an inverter).
The flattening head is equipped with a system for water cooling.
The mechanical working parts are equipped with an automatic
lubrication system.
TECHNICAL FEATURES Rolling Mill diameter
d40
OVERALL DIMENSIONS 750X1280X1180 (h) mm
TARE WEIGHT OF THE MACHINE Kg
POWER SUPPLY 380V – 50Hz
TOTAL POWER 2.4 Kw
MECHANIC-ENGINE POWER 2.2 Kw
LUBRICATOR-ENGINE POWER 0.09 Kw
WORKING SPEED Adjustable by means of a potentiometer
WORKING THICKNESS Adjustable by means of a handle –
maximum 0.70 mm
WINDER Equipped with an adjustable wire/metal strip- guiding
device
COOLANT FLUID Clean (not calcareous) fresh water
LUBRICATING OIL Use a specific oil. Get the technical form
containing security information on the used oil and comply
with the mentioned safety and sanitary levels
NOISE LEVELS AT THE WORK STATION Lp = 76 dB(A)
·
Other Product Details Jewellery
Machineries.
· All Jewelry Machineries and Equipments Catalogue
online. |
